Environment
Laboratory
Impact
Profile
Now the premier figure in a very niche market, ELI is unmatched in its expertise and the excellence of the products. ELI has risen to the challenge of meeting evolving pollution control standards, ensuring that biological, chemical, and radiological waste are disposed in an environmentally safe fashion. Its dedication to patient well-being has also driven ELI to develop a state-of-the-art nurse call system, developed via its trademark engineering finesse.

Dedicated to quality and safety, ELI brings the most advanced chemical waste management technologies to bear in their Dilution Tank System. The Dilution Tank System allows hospitals, laboratories, and medical facilities to efficiently, hygienically, and above all safely, dispose of liquid waste without compromising the quality of care those facilities provide. Utilising grey water technology coupled with chemical and biological detection systems, medical liquid waste is diluted until it is safe to be discharged. The tanks are customisable and come with a variety of accessories to suit the unique needs of your institution.

Dedicated to quality and safety, ELI brings the most advanced heat waste management technologies to bear in their Cooling Tank System. The Cooling Tank System allows hospitals, laboratories, and medical facilities to efficiently, environmentally, and above all safely, dispose of liquid waste without compromising the quality of care those facilities provide. Utilising grey water technology coupled with temperature detection systems, medical liquid waste is diluted until it is safe to be discharged. The tanks are customisable and come with a variety of accessories to suit the unique needs of your institution.

Medical Institutions must contend with hazardous biological waste in all forms of matter - solid, liquid, and gas.The improper disposal of this waste can affect their environmental licenses. ELI's Disinfection Tank System represents the cutting edge in technology designed to neutralise such waste while ensuring the by-products of its processes are free of biohazards. This system is also designed with the consumer in mind, from biological laboratories to hospitals, and as such are fully customisable while being a breeze to maintain.

DK Series
Dedicated to quality and safety, ELI brings the most advanced radioactive waste management technologies to bear in their DK Series Tank System. The DK-TS01 Model Tank System allows hospitals, laboratories, and medical facilities to efficiently, environmentally, and above all safely, dispose of radioactive waste without compromising the quality of care those facilities provide. Utilising grey water and radiation protection technology coupled with radiation detection systems, medical liquid waste is diluted or treated until it is safe to be discharged. The tanks are customisable and come with a variety of accessories to suit the unique needs of your institution.

While nuclear technology has been an enormous boon to medicine and the millions whose health depend on it, radiopharmaceuticals can also provide significant risks if not managed properly. ELI's Radiation Protection Systems provides that proper management. Institutions that deal with radioactive material, or 'Hot' labs, can count on the Radiation Protection Systems to dispose of both solid and liquid waste and monitor radioactive material. The state of the art Decay Tanks can process radioactive material while also being customisable to the needs of your medical facility.

Disposable medical devices for single use in both sterile and non-sterile environment, to deal with infected and non-infected waste during surgery or critical care environments.

Poloplast represents the cutting edge in piping technology and provides the ultimate drainage solution. Its three layer technology makes the pipes robust and impact resistant, making them ideal for a variety of elements. The inner layer also boasts painstakingly engineered smoothness and noise insulation. The Poloplast system's wide range of system components and modular design allows rapid assembly for almost all conditions.

The PoloEcosan is the forefront in hot and cold water piping systems. The three layer piping technology featuring high grade plastics and fibreglass ensures stability and steady flow, with the capacity to withstand high volumes. PoloEcosan is engineered to deal with expansions due to fluctuating temperatures and other changes in the elements, which guarantees you constant consistent quality. This makes the system perfect for your home of business.

For more than five decades, Polo-Kal has been leading innovation in above ground drainage solutions. These multi-layer piping systems are built with state-of-the-art plastics. The system is therefore guaranteed to be safe, quite and easy to install and maintain. Choosing Polo-Kal means you also choose expert service that comes with years of unparalleled expertise.

Medical practitioners who work with life saving radiation technology deserve the best in radiation protection, and ELI provides that. The ELI system includes a range of radiation protection products for both the practitioner and the equipment they operate. They can chose from the gold standard in lead and lead free aprons and room radiation shielding, readily installed by the professionals at ELI. ELI also includes a suite of accessories that allow the system to be customised to fit any medial department dealing with radiation and nuclear technology, safely and conveniently.

High Density Concrete is an environmentally safe and cost effective solution from lead shielding that used in construction of high radiation centres. High density blocks has significant attenuation properties that result in obtaining the desired protection levels from both Gamma and Neutron Radiation. High density blocks increase floor space by 10 to 30 % when compared to normal density concrete. All facilities want to eliminate the use of lead due its environmental challenges. High density concrete blocks is the sound choice for environmentally safe radiation protection.
Services
Professional Consultancy
ELI provides consultation on clinical equipment specifications, site planning, manpower requirements, incident reporting, and comparative studies for the following disciplines:
- Medical Physics
- Nuclear Medicine
- Radiotherapy
- Radiology
- Oncology
- Emergency Medicine
- Clinical Engineering
- Nursing
X-ray equipment are routinely checked and tested by certified bodies to ensure a safe and accurate performance during operation.
Engineering Solutions
ELI customise engineering solutions and communications management system to achieve a seamless and cost effective measures to institutions dealing with chemical, biological and radioactive waste.
ELI aspires to deliver impeccable quality in design, supply, installation, test and commission, and maintenance for medical and science institutions, and has worked closely with diverse partners across a range of industries to deliver astounding results.
License Application & Renewal
We assist in the process of license application or renewal upon agreement of the initial terms.
X-Ray Equipment
Safety & Performance Tests
These tests verify the radiation protection of x-ray equipment. Patient dosage depends on the ability of the x-ray equipment to deliver radiographs consistently over time. Periodic performance checks will affirm this.
Acceptance Testing / Commissioning
More often than not the user will depend on the vendor in these matters, meaning they may not have the technical expertise to challenge the delivery of promised specifications. ELI using independent Ministry of Health approved procedures and sophisticated test tools, will verify these results and empower customer choice.
Film Processing Units & Darkroom
Safety & Performance Tests
As patient dosage ultimately depends on the complete imaging process, it is important that film processing units and darkrooms be checked as part of a complete quality assurance program.
Structural Shielding & Layout Advisory
The Ministry of Health’s guidelines with reference the size, layout, and shielding necessary to avoid delays in the issuance of operating license.
Radiation Safety & Training
We provide a wide range of training services to help update your expertise in this ever-changing and challenging field.
Some of our Projects

New Disinfection & Dilution Tank System
Client: Sengkang General and Community Hospital
Location: Sengkang, Singapore

Maintenance Decay, Disinfection & Dilution Tank System
Client: Farrer Park Hospital
Location: Racecourse, Singapore

Project Consultation - Decay Tank System
Client: Ng Teng Fong Hospital
Location: Jurong East, Singapore

Project Consultation - Decay Tank System
Client: Mount Elizabeth Novena Hospital
Location: Irrawady, Singapore

Decommissioning PET / CT System
Client: Maccine Pte Ltd
Location: Science Park 2, Singapore

New Decay Tank System
Client: National University Hospital
Location: Selangor, Malaysia

New Decay Tank System
Client: University Malaya Medical Center
Location: Selangor, Malaysia

Radiation Decay Tank Monitoring System
Client: University Malaya Medical Center
Location: Selangor, Malaysia

Radiation Decay Tank Monitoring System
Client: Penang General Hospital
Location: Penang, Malaysia
Contact
E.L.I. Services Pte Ltd
Blk 7, Kallang Place, #02-10 Singapore 339153